Appliance · Tools

How many watts does a cordless drill battery charger use — and what can run it?

An 18 V cordless tool charger (RYOBI P117) is rated 85 W input, 18 V / 3.0 A output. Which power stations can charge drill batteries, and for how long.

Running draw85 W source
Starting drawnone
Average per hour of usenot published
Typical use1 h/day

Output 18 V DC, 3.0 A per Ryobi.

The representative charger is the RYOBI P117, an 18V ONE+ dual-chemistry charger. RYOBI's product page lists an input of 120 V, 60 Hz, 85 W and an output of 18 V DC, 3.0 A. The site uses the 85 W input as the running figure. It is a rated maximum, so actual draw is at or below it.

What changes the draw

A charger draws its most while it pushes current into a depleted battery and less as the battery fills. The output side, 18 V × 3.0 A, is 54 W; the gap to the 85 W input rating covers conversion losses and headroom in the rating. Charging a larger battery takes longer at the same wattage, which changes energy, not the station's required output. The page assumes one hour of charging a day, 85 Wh.

No starting surge

A battery charger has no motor start and no starting figure. The deciding number is continuous output: 85 W rules out only the 80 W MARBERO M82 among stations with an AC outlet.

Reading the tables

Runtime is time at the full 85 W, not a number of batteries charged; RYOBI's battery capacities are not in this page's data. Example: the DARAN R100 record has no maker factor, so the default 0.85 applies: 89.6 Wh × 0.85 ÷ 85 W = 0.9 hours. A 1,024 Wh station gives 10.2 hours by the same arithmetic. For the corded tools a job site also runs, see the circular saw page.

Power stations that can run it

Pass = continuous output ≥ 85 W. Runtime = capacity × maker's factor ÷ 85 W, nothing else plugged in. Method.

ModelFitsRuntime at 85 WCapacityList price
MARBERO 88Wh Portable Power Station (M82)No—89 Wh$119.99
DARAN R100 (89.6Wh)Yes54 min90 Wh$149.99
Bluetti EB3AYes2.6 h269 Wh$219
EcoFlow RIVER 3 PlusYes2.9 h286 Wh$299
Anker SOLIX C300Yes2.9 h288 Wh$429.99
Anker SOLIX C300 DCNo—288 Wh$349.99
Jackery Explorer 300Yes2.9 h292 Wh$289
Goal Zero Yeti 500Yes5 h499 Wh$499.95
Bluetti AC70Yes7.7 h768 Wh$359
Anker SOLIX C1000 Gen 2Yes10 h1,024 Wh$499.99
EcoFlow DELTA 3Yes10 h1,024 Wh$699
EcoFlow DELTA 3 ClassicYes10 h1,024 Wh$599
EcoFlow DELTA 3 PlusYes10 h1,024 Wh$799
Anker SOLIX C1000XYes11 h1,056 Wh$469.99
Jackery Explorer 1000 v2Yes11 h1,070 Wh$559
Bluetti AC180Yes10 h1,152 Wh$499
Jackery Explorer 1000 PlusYes13 h1,264 Wh$699
Goal Zero Yeti 1500Yes15 h1,505 Wh$1,499.95
Goal Zero Yeti 1500XYes15 h1,516 Wh$1,124.89
EcoFlow DELTA Max (2000)Yes20 h2,016 Wh—
Jackery Explorer 2000 v2Yes20 h2,042 Wh$999
Jackery Explorer 2000 PlusYes20 h2,043 Wh—
Anker SOLIX C2000 Gen 2Yes20 h2,048 Wh$899.99
Bluetti AC200LYes20 h2,048 Wh$899
EcoFlow DELTA 2 MaxYes20 h2,048 Wh$1,299
EcoFlow DELTA 3 MaxYes20 h2,048 Wh$1,199
EcoFlow DELTA 3 Max PlusYes20 h2,048 Wh$1,599
Bluetti Elite 200 V2Yes19 h2,074 Wh$899
Jackery HomePower 3000Yes31 h3,072 Wh$1,499
Anker SOLIX F3800 PlusYes38 h3,840 Wh$2,599.99
EcoFlow DELTA Pro 3Yes41 h4,096 Wh$3,299

Generators that can run it

ModelFitsLoadPublished run timeCO sensorList price
Champion 100396 3400W Electric Start Dual Fuel InverterYes3 % (gasoline)7.5 h @ 25 %No—
Champion 201241 13,500W Electric Start Tri Fuel GeneratorYes1 % (gasoline)8 h @ 50 %Yes—
Champion 201319 4500W Electric Start Dual Fuel InverterYes2 % (gasoline)14 h @ 25 %Yes—
DuroMax XP13000EHYes1 % (gasoline)17 h @ 25 % · 8 h @ 50 %Yes$1,299
DuroMax XP9500iHYes1 % (gasoline)21 h @ 25 % · 11 h @ 50 %Yes$1,999
Generac GP8000E (with COsense, model 7715)Yes1 % (gasoline)10 h @ 50 %Yes—
Generac iQ3500 (with COsense)Yes3 % (gasoline)14.1 h @ 25 % · 8.9 h @ 50 %Yes—
Honda EU2200iYes5 % (gasoline)8.1 h @ 25 % · 3.2 h @ 100 %Yes$1,199
Honda EU3200iYes3 % (gasoline)8.6 h @ 25 % · 3.3 h @ 100 %Yes$2,799
Honda EU7000iSYes2 % (gasoline)16 h @ 25 % · 6.4 h @ 100 %Yes$4,899
WEN DF680iXYes2 % (gasoline)6.1 h @ 50 %Yes$803.40
WEN GN400iYes2 % (gasoline)7 h @ 50 %No$479.99
Westinghouse WGen7500DFcYes1 % (gasoline)11 h @ 25 %Yes$1,299
Westinghouse WGen9500DFYes1 % (gasoline)12 h @ 25 % · 8 h @ 50 %No$1,249
Westinghouse WGen9500DFcYes1 % (gasoline)12 h @ 25 % · 8 h @ 50 %Yes$1,399
Westinghouse WGen9500DFc EFIYes1 % (gasoline)15 h @ 25 % · 10 h @ 50 %Yes$1,549

Frequently asked questions

How many watts does a drill battery charger use?
The RYOBI P117 18V ONE+ charger lists an input of 120 V, 60 Hz, 85 W and an output of 18 V DC, 3.0 A on RYOBI's product page. The 85 W is a rated maximum.
Can a small power station charge tool batteries?
Yes, if its continuous output covers 85 W. The 100 W DARAN R100 passes; the 80 W MARBERO M82 does not.
How long can a power station run a tool charger?
At the full 85 W and the default 0.85 factor, the 89.6 Wh DARAN R100 lasts 89.6 × 0.85 ÷ 85 = 0.9 hours. How many batteries that charges depends on their capacity, which is not part of this page's data.

Sources

  1. RYOBI — 18V ONE+ Dual Chemistry Charger P117 product details (accessed 2026-10-31)

Page updated 2026-10-31.